Question: What are the 3 types of fuses?

What is fuse explain the type of fuse?

A Fuse or an Electric Fuse is an Electrical / Electronic device that protects the circuit from different electrical faults like over current and overload. A simple fuse consists of a small conductive material with low resistance and it is placed in series with the circuit.

What is D type cartridge fuse?

D-type Fuse: This type of fuse is composed of the cartridge, base of the fuse, adapter ring, and cap. The base of the fuse consists of a fuse cap, which is packed with the fuse ingredient by cartridge using an adapter ring. D-type Fuses are non-interchangeable and have the advantage of being highly reliable.

What are the different fuse sizes?

Size groupsBlade sizeBlade groupCommon ratings (maximum current)Micro2APT, ATR5, 7.5, 10, 15, 20, 25, 30Micro3ATL5, 7.5, 10, 15LP-Mini (low profile)APS, ATT2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30MiniAPM, ATM2, 3, 4, 5, 7.5, 10, 15, 20, 25, 302 more rows

Where are the fuses used?

Fuses are widely used for protection of electric motor circuits; for small overloads, the motor protection circuit will open the controlling contactor automatically, and the fuse will only operate for short circuits or extreme overload.

Why are there different types of fuses?

When the fuse gets break or damage, then an abrupt sparkle happens which may direct damage your home appliances. That is the major reason we require different types of fuses to guard our home-appliances against damage. There are many types of fuses used for circuit protection. Fuses are generally rated in Amperes.

What are D type fuses used for?

Standard non-time delay fuses are for receptacle and lighting circuits. Standard time delay fuses are for motor loads. For Canadian requirements, a type “P” fuse is used for non-motor loads and type “D” fuses are used for electric heating and cycling loads circuits.

How do I know what size fuse to use?

The simple calculation is watts divided by volts equals amps. After you have calculated this, it is a simple case of adding around 10% to the value and choosing the nearest fuse to match. This is a more precise method then just guessing should you require a 3, 5, or even 13 amp fuse.

What are 10 amp fuses used for?

A 10A fuse has a rating of 10A, which is a measure of current flow. A 10 Amp fuse will be used to power and protect the circuit. They cant be made to be that precise and repeatable because they dont run normally at 10.00 Amp and blow at 10.01 Amp.

How do I choose a fuse?

How to Choose the Right FuseIdentify the type of voltage that is being protected. Observe the amperage of the electrical circuit that the fuse will be protecting. Size the fuse to its particular holder. Inspect the fuse for internal element replacement. Use a fuse that has an inspection window.

How do you tell if a fuse has gone?

Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

How many watts can a 10 amp fuse handle?

1200 Watts 10 Amps x 120 Volts = 1200 Watts.

Tell us about you

Find us at the office

Smack- Kinneer street no. 65, 62402 Kingston, Jamaica

Give us a ring

Drexel Lepak
+30 694 593 49
Mon - Fri, 7:00-15:00

Contact us